Fiber Optic Sight for Umarex T4E HDP/TP50 Compact
The factory-standard iron sights on the Umarex TP50 Compact are often difficult to track, particularly in low-light environments, high-stress situations, or rapid-fire scenarios where every millisecond counts. Relying on basic, small polymer notches leaves you searching for your sight picture when you should be focused on the target.
The Print-Force Fiber Optic Sight Set completely eliminates this limitation by introducing a high-contrast fiber optic set for fast target acquisition. By replacing standard sights with our proprietary fiber-optic array, you gain an instinctive, glowing sight picture that allows your eyes to naturally snap onto the target with unparalleled speed and clarity.
The Print-Force Fiber Optic Sight Set completely eliminates this limitation by introducing a high-contrast fiber optic set for fast target acquisition. By replacing standard sights with our proprietary fiber-optic array, you gain an instinctive, glowing sight picture that allows your eyes to naturally snap onto the target with unparalleled speed and clarity.
€24,95
SELECT COLOR
System-loadFront & Rear Module
ClassificationSight / Optic Targeter
SpectrumBlack, Green, Red [Optic Refractors Enabled]
Core-MatPETG-HF, Optical fiber
Platform-FitUmarex T4E HDP/TP50 Compact (Gen 1/2)
Form-Dim25 × 15 × 10 mm (L×W×H)
HS-ID#9506999000
REV_
Reviews
Loading reviews…
×
❮
![Lightbox Image]()
❯
COMP_
Compatibility
Optic alignment scan ////
01 / confirmed
Umarex T4E HDP/TP50 Compact Gen1
02 / confirmed
Umarex T4E HDP/TP50 Compact Gen2
03 / error
Umarex T4E HDP/TP50 Gen1
04 / error
Umarex T4E HDP/TP50 Gen2
INSTALL_SEQ
Installation
01
Preparation & Surface Cleaning
Ensure the Umarex T4E TP50 Compact is completely unloaded and safe. Using a clean, dry microfiber cloth, wipe down the existing front and rear sight rails on the marker to remove any oils, dust, or factory residue. A clean surface is essential for the friction-fit housings to seat securely. WARNING: Before applying pressure during installation, double-check that the sight is seeded correctly.
02
Front Sight Alignment
Take the Print-Force front sight housing and align it with the front sight rail of the marker. Apply steady, even pressure to slide the housing onto the rail from the front, pushing it backward until it is firmly seated against factory stop. Ensure the sight is perfectly centered before applying pressure.
03
Rear Sight Attachment
Align the Print-Force rear sight housing with the rear rail section. Slide the sight onto the rail with a smooth, consistent motion. The internal geometry of the housing is designed for a precision “snap-fit”; apply pressure until you feel the housing lock into its final position, ensuring it is flush with the marker’s rear profile.
04
Final Verification
Perform a visual inspection to ensure both sight housings are level and square with the barrel axis. Pro-Tip: If the fit feels too tight due to ambient temperature variations or tight factory rail tolerances, a very light application of dry silicone spray can assist the slide-on installation without compromising the long-term structural grip.
MAT_SPEC
Why PETG-HF
Satin Aesthetic
Engineered from high-flow PETG, these housings offer a premium, professional-grade aesthetic straight off the print bed. The material is optimized to print a smooth, uniform satin finish without the need for paint or secondary processing, ensuring a clean, factory-like look while maintaining the structural toughness required to withstand use.
UV & Weather Resilience
Built for consistent performance in any climate, the PETG-HF composite features inherent UV and weather resistance. Unlike standard plastics that may fade, crack, or become brittle when exposed to harsh sunlight or temperature fluctuations, this industrial-grade material retains its deep color and structural integrity, ensuring your equipment remains reliable and professional in every environment.
High-Visibility Optics Fiber
Equipped with premium light-gathering rods in vibrant Green and high-contrast Red (a glowing orange hue), these sights provide rapid target acquisition. Each rod is precision-fit into the housing to maximize ambient light capture, resulting in a crisp, vivid sight picture that remains highly visible and easy to track in both bright daylight and low-light shooting scenarios.
WARR_
Warranty
Limited Lifetime Warranty Protection
All 3D-printed parts come with a limited lifetime warranty under normal use. If a component ever fails during regular operation, simply contact us and we will ship a replacement. Please review our full Terms & Conditions or FAQ page for ordering details and product guidelines.